Seat Belt, Front, Remove and Install (Model
F08)
Remove
1. |
Remove inner panelling, front of rear quarter panel (model F
08)
|
|
2. |
Detach guide fitting (1) from height adjuster
|
3. |
Detach upper belt guidance system (2) from B-pillar
|
4. |
Detach reel retractor (3) from B-pillar
|
5. |
Release sliding rail, seat belt (4), from the side of the
underbody
|
6. |
Detach seat belt (5) from sliding rail
|
|
Install
|
7. |
Ensure correct seating lower belt guidance system (1)
Note: Damaged belt
guidance systems must be replaced.
|
8. |
Attach seat belt to sliding rail
|
9. |
Fasten sliding rail for seat belt to the side of the underbody
35 Nm
|
10. |
Attach reel retractor on B-pillar 35
Nm
|
11. |
Attach upper belt guidance system to B-pillar 1.5 Nm
|
12. |
Attach guide fitting to height adjuster 35 Nm
|
|
13. |
Install inner panelling, front of rear quarter panel (model F
08)
|
|