Bracket, Hydraulic Modulator, Remove and
Install
1. |
Remove hydraulic modulator with ABS-control unit
|
2. |
Unclip cable duct for engine control unit (1) and radiator fan
motor (2) from hydraulic modulator bracket
• |
Unclip coolant hose (3) from hydraulic unit bracket
|
|
3. |
Remove fastening bolts of hydraulic modulator bracket at front
frame side member (arrows). Remove hydraulic modulator bracket.
|
|
|
Install
4. |
Insert hydraulic unit bracket and attach to front frame side
member with fastening bolts - tightening torque 10 Nm
• |
Clip cable duct, engine control unit and radiator fan motor, to
hydraulic modulator bracket
|
|
5. |
Clip in coolant hose to hydraulic unit bracket
• |
Install hydraulic modulator with ABS-control unit
|
|
|