Vauxhall Corsa C Workshop Service and Repair Manuals

Crank drive, cylinder block - Z 13 DT DOHC diesel engine

The crank drive of the Z 13 DT engine is divided into a cylinder block and a cylinder block base plate. The cylinder block base plate sits between the cylinder block and the oil sump and keeps the crankshaft bearing caps and crankshaft in the cylinder block.

The main features are as follows:

• Cast iron cylinder block
• Aluminium cylinder block base plate
• Bore spacing 77 mm
• Bore diameter 69.6 mm
• Stroke 82 mm

1. Cylinder block 2. Cylinder block base plate