Vauxhall Workshop Service and Repair Manuals

J741000 Hot-Film Mass Air Flow Meter, Replace (Y 17 DTL, without AC, LHD)

1. Open bonnet

2. Remove hot film mass air flow meter (2)

• Detach wiring harness plug for hot film mass air flow meter (1)
• Release in direction of arrow
• Release 2 clamps

3. Install hot-film mass air flow meter

• Tighten clamps (3.5 Nm / 2.5 lbf. ft.)
• Connect wiring harness plug.

4. Close bonnet