Vauxhall Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Air Flow Meter >
< Replace knock sensor (Z 10 XE, Z 10 XEP, without air conditioning, LHD)
Corsa C
J Engine and Engine Aggregates
Fuel Injection Systems
Motronic M/ME 1.5.5
Knocking Sensor / Repair Instructions
Replace knock sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Replace knock sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Remove
1.
Open bonnet
2.
Raise vehicle
3.
Remove knock sensor (1)
•
Disconnect wiring harness plug (2)
•
Remove bolt
Install
4.
Clean contact surface
5.
Install knock sensor
Note:
Correct tightening torque must be used
•
Tighten bolt
20 Nm
•
Connect wiring harness plug
6.
Lower vehicle
7.
Close bonnet
J Engine and Engine Aggregates
Fuel Injection Systems
Motronic M/ME 1.5.5
Knocking Sensor / Repair Instructions
Replace knock sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)
Air Flow Meter >
< Replace knock sensor (Z 10 XE, Z 10 XEP, without air conditioning, LHD)