vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Air Mass Meter > < Replace crankshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)

Corsa C

Replace knock sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)

  Remove

1.   Open bonnet
2.   Raise vehicle
3.   Remove knock sensor (1)
•   Disconnect wiring harness plug (2)
•   Remove bolt
Object Number: 2410655 Size: DEFAULT


  Install

4.   Clean contact surface
5.   Install knock sensor
Note:   Correct tightening torque must be used
•   Tighten bolt 20 Nm
•   Connect wiring harness plug
6.   Lower vehicle
7.   Close bonnet

Air Mass Meter > < Replace crankshaft sensor (Z 12 XE, Z 12 XEP, Z 14 XEP, with air conditioning, LHD)