Field Remedy: 1742
Subject: |
Engine Z10XEP, Z14XEP - Oxygen sensor
failure, MIL illuminates |
Models: |
Engines: |
Option: |
Agila 2004,Corsa-C 2004 |
Z10XEP,Z10XEP| Z14XEP |
|
Complaint: |
Several failure codes regarding post-cat
oxygen sensor set (2nd. oxygene sensor P0141 (4+8), P0136 (1)). In
some cases the pre-cat oxygen sensor is also defect (1st oxygene
sensor - P0130 (1), P0135 (8)). |
Cause: |
Water penetrates into engine wiring harness
fuel injection causes corrosion on plug connection to oxygen
sensors. |
Production: |
Introduction of improved engine wiring
harnesses fuel injection in production as of the following
engine-No: 19DG0526 (17.05.2004). |
Remedy:
In case of customer complaint replace the defective oxygen
sensor and install a new engine wiring harness fuel injection
(partno.: 24467266 / catalogueno.: 12 92 428 for Agila with engine
Z10XEP and partno.: 24467265 / catalogueno.: 12 92 007 for Corsa-C
with engine Z10XEP, for Corsa-C with engine Z14XEP use partno.:
24467263 / catalogueno.: 12 92 006).
FunctionalGroup: |
J - Engine |
Complaint Group: |
04 - Electrical failures |
Trouble Code: |
P0130,P0135,P0136,P0141 |
|