vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Control Unit > < High Pressure Line (High Pressure Pump - Accumulator), Replace

Corsa C

Hot Film Mass Air flow Sensor, Replace

  Remove

1.   Open bonnet
2.   Remove hot film mass air flow sensor (2)
•   Disconnect wiring harness plug of hot film mass air flow meter
– Release wiring harness plug (1) in direction of arrow
•   Release 2x clamp
Object Number: 2411192 Size: DEFAULT


  Install

3.   Install hot-film mass air flowmeter
Note:   Pay attention to installation position
•   Attach 2 clamps 3.5 Nm
•   Connect wiring harness plug of hot film mass air flow meter
– Lock wiring harness plug
4.   Close bonnet

Control Unit > < High Pressure Line (High Pressure Pump - Accumulator), Replace