vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Camshaft Pulse Pick-up > < Preheater System Control Unit, Replace

Corsa C

Coolant Temperature Sensor, Replace

  Remove

1.   Open bonnet
2.   Drain coolant
•   Place collecting basin underneath.
•   Open drain bolt
Object Number: 2411059 Size: DEFAULT


3.   Remove fuel filter housing (2)
•   Disconnect 4 lines (1) and (4)
– Use KM-796-A
•   Disconnect 2 wiring harness plugs
– Housing cover (3)
– Housing bottom (arrow)
•   Close 4 fuel lines
Object Number: 2406294 Size: DEFAULT


4.   Loosen coolant compensation tank
•   Unclip coolant compensation tank
5.   Remove crash box
•   Remove nut
•   Remove nut
6.   Detach charge air pipe (1) from intake manifold
•   Release clamp
•   Unscrew 4 bolts (arrows)
Object Number: 2406307 Size: DEFAULT


7.   Remove coolant temperature sensor (1)
•   Lock wiring harness plug (2)
•   Unscrew coolant temperature sensor
Object Number: 2408393 Size: DEFAULT


8.   Cleaning work

  Install

9.   Install coolant temperature sensor
•   Coolant temperature sensor
•   Lock wiring harness plug
10.   Install charge air pipe
•   Replace seal ring
•   Tighten 4 bolts
•   Fasten clamp 3.5 Nm
11.   Install crash box
•   Tighten 2 nuts 25 Nm
12.   Install fuel filter
•   Connect 2 wiring harness plugs
•   Connect 4 lines
13.   Fasten coolant compensation tank
•   Clip in coolant compensation tank
14.   Top up coolant
15.   Close bonnet

Camshaft Pulse Pick-up > < Preheater System Control Unit, Replace