vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Schematic and Routing Diagrams > < Base Holder - Telephone System - Replace (Upgrade Kit)

Corsa C

Control Unit - Telephone System - Replace (Upgrade Kit)

  Remove

1.   Disconnect battery.
2.   Remove glove compartment
•   Unscrew 4x bolt (arrows)
Object Number: 2409018 Size: DEFAULT


Object Number: 8326604 Size: DEFAULT

3.   Remove control unit
•   Detach control unit and lay aside
– Cut 2x cable tie (1)
•   Disconnect 4 wiring harness plugs (2)

  Install

4.   Fit control unit
•   Fasten control unit
– Connect 4x wiring harness plug
– Connect 2x cable tie
5.   Position glove compartment in instrument panel padding and attach it
•   Tighten 4x screw
6.   Connect battery.
7.   Program volatile memories

Schematic and Routing Diagrams > < Base Holder - Telephone System - Replace (Upgrade Kit)