GPS Control Unit, Remove and Install (only in
conjunction with Radio CCRT 2008)
Important:
Operations to be undertaken with TECH 2 when replacing control
units.
Remove
1. |
Remove glove compartment
|
2. |
Detach control unit bracket
• |
Unscrew 2x bolt (arrows)
|
• |
Release wiring harness plug and disconnect
|
• |
Disconnect aerial cable
|
|
3. |
Unclip control unit from bracket
|
|
|
Install
4. |
Fit control unit
• |
Insert control unit in bracket
|
• |
Connect and lock wiring harness plug
|
|
6. |
Operations to be performed with TECH 2 when replacing control
units
|
|