Telematics Unit, Remove and Install
Important: Only
for replacement: Deactivate ATWS in the navigation system/radio
with TECH 2 - see "Operations to be Undertaken with TECH 2 when
Replacing Control Units"
Remove
1. |
Remove telematics unit
• |
Unscrew 4x grub screw (arrows)
|
• |
Insert removal bar until it engages in the aperture
|
• |
Press both removal bars outwards and remove telematics unit
from mounting
|
|
|
|
Install
Important: Only for replacement:
undertake code index programming of the new telematics unit with
TECH 2 - see corresponding test instructions . Activate ATWS
in navigation system/radio with TECH 2 - See "Operations to be
Undertaken with TECH 2 when Replacing Control Units"
|
2. |
Install telematics unit
• |
Push telematics unit into installation shaft until it
engages
|
|
|