Detach OPC line rear spoiler
Remove
|
1. |
If present: remove the auxiliary brake lamp and rear window
washer nozzle
|
2. |
Mark out cross cuts below the adhesive (1)
Note: The exact
positions of the adhesive are specified in the installation
instructions that accompany the new part!
|
3. |
Detach the rear spoiler at the marked cross cuts using a
suitable tool
Note: Pay attention to
the immersion depth of the separating tool!
|
4. |
Pierce the adhesive seams with a palette knife or flat scraper
and remove the rest of the rear spoiler from the tailgate
Note: Removal can be
facilitated by heating the adhesive seams with an industrial heat
gun!
|
5. |
Remove adhesive residue from the tailgate with a flat
scraper.
Note: Do not damage the
paintwork!
|
|
Install
6. |
Follow the instructions accompanying the new part for
installation.
|
|