vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Replace bulkhead closing part > < Extra work for 'Replace front complete

Corsa D

Replace wind protection panelling

  Remove

Object Number: 10678719 Size: DEFAULT

1.   Remove wind protection panelling seal (1)
2.   Remove wiper arms (2)
•   Remove 2x cover caps
•   Unscrew 2x nuts
•   Remove 2x washers
•   Pull 2x wiper arm from shaft with KM-6626-20
3.   Remove wind protection panelling
•   Unscrew 2x bolts (arrows)
•   Remove wind protection panelling from windscreen guide
•   Separate screen wash system hose

  Install

4.   Install wind protection panelling
•   Connect screen wash system hose
•   Insert wind protection panelling in windscreen guide
•   Tighten 2x bolts
5.   Fit wiper arms
•   Push 2x wiper arms onto shaft
Note:   Check for correct installation position of wiper arms!
•   Insert 2x washers
•   Tighten 2x nuts
•   Install 2x cover caps
6.   Install wind protection panelling seal

Replace bulkhead closing part > < Extra work for 'Replace front complete