vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Technical Service Bulletins > < Replace seat shell, front seat backrest - OPC

Corsa D

Replace seat console - OPC

  Remove

1.   Remove front seat
2.   Detach adjustment handle (1) on front seat backrest
•   Unclip adjustment handle panel (2) with suitable tool
•   Unclip front seat backrest adjustment handle
Object Number: 10678661 Size: DEFAULT


3.   Detach height adjuster panel (1)
•   Unclip panel with a suitable tool
4.   Detach height adjuster (2)
•   Unscrew bolt (3) and remove lever
Object Number: 10679419 Size: DEFAULT


Object Number: 10679484 Size: DEFAULT

5.   Detach outside panelling (1)
•   Unscrew 2x bolt (2)
•   Unclip panelling

6.   Detach inside panelling
•   Unscrew bolt (arrow)
•   Unclip panelling (1)
Object Number: 10679424 Size: DEFAULT


7.   Detach front seat backrest
•   Unscrew 4x bolt (1, 2)
•   Release and unclip Bowden cable (3)
Object Number: 10680708 Size: DEFAULT


8.   Detach upholstery covering on front seat backrest all round
9.   Detach front seat backrest panelling (2) left
•   Fold up pad (1)
•   Unscrew 11x bolt (arrows)
•   Release clip (3)
•   Remove panelling
Object Number: 10680709 Size: DEFAULT


10.   Clean thread
•   Recut 11x threads
11.   Detach side airbag wiring harness (1) from front seat backrest
•   Release and disconnect wiring harness plug (2)
•   Detach 3x cable tie (arrows)
Object Number: 10680710 Size: DEFAULT


12.   Lay front seat backrest aside
13.   Detach front seat frame (3)
•   Pull side airbag wiring harness (1) through seat cushion
•   Unscrew 2x bolt (2)
•   Unclip 4x (arrows)
Object Number: 10680711 Size: DEFAULT


14.   Detach wiring harness (1), central wiring harness plug
•   Detach 3x cable tie (arrows)
•   Detach adhesive tape (2) for belt buckle tensioner
Object Number: 10680748 Size: DEFAULT


15.   Detach belt buckle tensioner
•   Unscrew bolt (1)
Object Number: 3446930 Size: DEFAULT


  Install

16.   Attach belt buckle tensioner
•   Tighten bolt 35 Nm
17.   Attach wiring harness, central wiring harness plug
•   Insert wiring harness
•   Attach 3x cable ties
•   Attach adhesive tape for belt buckle tensioner
18.   Attach seat frame
•   Clip in 4 clips
•   Tighten 2x bolts
•   Lay side airbag wiring harness through seat cushion
19.   Insert pad
20.   Attach side airbag wiring harness to front seat backrest
•   Attach 3x cable ties
•   Connect and latch wiring harness plug
21.   Attach front seat backrest panelling left
•   Clip in panelling
•   Tighten 11x bolt
Note:   Screws must be inserted with locking compound.
22.   Fasten upholstery covering all round
23.   Attach front seat backrest to front seat
•   Tighten 4x bolt
•   Attach and clip in Bowden cable
24.   Attach panelling inside
•   Clip in panelling
•   Tighten the bolt
25.   Attach outside panelling
•   Clip in panelling
•   Tighten 2x bolts
26.   Install height adjuster
•   Insert lever
•   Tighten the bolt
27.   Install height adjuster panel
•   Clip in panel
28.   Attach adjustment handle on front seat backrest
•   Push on adjustment handle
•   Clip in adjustment handle panel
29.   Install front seat

Technical Service Bulletins > < Replace seat shell, front seat backrest - OPC