vauxhall Workshop Repair Guides

Vauxhall Corsa D Workshop Service & Repair Manuals

ABOUT US
Replace upholstery covering for front seat and seat backrest - L68 > < Front Seat Backrest Upholstery Covering, Replace - L68

Front Seat Repair: Replace Upholstery Covering - Corsa D/C L08

Replace upholstery covering for front seat and seat backrest - L08

1.   Remove front seat
Note:   Observe waiting time for airbag deactivation, 1 min.
2.   Remove head restraint
•   Release head restraint in direction of arrow, and withdraw upwards
Object Number: 10678658 Size: DEFAULT


3.   Detach adjustment handle (1) on front seat backrest
•   Unclip adjustment handle panel (2) with suitable tool
•   Unclip front seat backrest adjustment handle
Object Number: 10678661 Size: DEFAULT


4.   Detach height adjuster panel (1)
•   Unclip panel with a suitable tool
5.   Detach height adjuster (2)
•   Unscrew bolt (3) and remove lever
Object Number: 10679419 Size: DEFAULT


6.   Remove side airbag
7.   Uncover airbag cable harness
•   Detach 2x cable tie
•   Expose wiring harness from seat backrest
8.   Detach lever (1) with panel (2) on front seat backrest
•   Unscrew bolt (3)
Object Number: 10680002 Size: DEFAULT


9.   Remove front seat backrest
•   Detach 2x tension strap
•   Unscrew 4x bolt (1, 3)
•   Release and unclip Bowden cable (2)
Object Number: 10679985 Size: DEFAULT


Object Number: 10679420 Size: DEFAULT

10.   Remove guide sleeves
•   Bend release hook for guide sleeves out of conventional wire (diameter 1.5 - 2 mm) as shown
– I = 70 mm
– II = 70°
– III = 10 mm
– IV = 160 mm
•   Mark insert depth of 140 mm
•   Insert release hook at front, release guide sleeve and withdraw upward

11.   Remove upholstery covering for seat backrest
•   Detach upholstery covering from seat mount all the way round
•   Remove 11x upholstery clamps
•   Remove upholstery covering
Object Number: 10679989 Size: DEFAULT


Object Number: 10679986 Size: DEFAULT

12.   Detach upholstery covering front seat all round
•   Undo 6x clips (1, 2)
Note:   Clips cannot be removed without damage, and must be replaced.
•   Remove from guides

13.   Detach upholstery covering of front seat
•   Detach upholstery covering from seat mount all the way round
•   Detach 11x upholstery clamps
•   Remove upholstery covering
Object Number: 10679987 Size: DEFAULT


  Install

14.   Attach upholstery covering of front seat
•   Attach 11x upholstery clamps
15.   Fasten upholstery covering front seat all round
•   Insert 4x in guide
•   Clip in 6x clips
16.   Attach upholstery covering for seat backrest
•   Fit upholstery covering
•   Attach 11x upholstery clamps
•   Fasten upholstery covering to seat mount all the way round
17.   Install head restraint guide sleeves
•   Audibly engage
18.   Install front seat backrest
•   Tighten 4x bolt
•   Attach and clip in Bowden cable
•   Attach 2x tension strap
19.   Attach lever with panel on front seat backrest
•   Insert in guide
•   Tighten the bolt
20.   Lay airbag cable harness
•   Lay wiring harness on seat backrest
•   Attach 2x cable ties
21.   Install side airbag
22.   Fit height adjuster lever
•   Tighten the bolt
23.   Fit height adjuster lever panel
24.   Install head restraint
25.   Install adjusting wheel for front seat backrest
•   Clip in 3x
26.   Detach panel from adjuster wheel
27.   Install front seat

Replace upholstery covering for front seat and seat backrest - L68 > < Front Seat Backrest Upholstery Covering, Replace - L68