Replace rear seat pad - L08
Remove
1. |
Remove rear seat base (1)
• |
Unscrew 3x bolt
– |
Unclip 3x screw cover (arrows)
|
|
• |
Press seat base to rear, and remove upwards from rear guide
|
|
|
|
2. |
Clean 3x thread and recut
|
3. |
Detach upholstery covering (1) all round
• |
Remove upholstery covering 18x from bracket (2)
|
|
|
|
4. |
Detach seat pad
• |
Detach 14x upholstery clamp
|
• |
Remove upholstery padding
|
|
|
|
Install
5. |
Attach seat pad
• |
Attach 14x upholstery clamp
|
|
6. |
Fasten upholstery covering all round
• |
Attach upholstery covering 18x in holder
|
|
7. |
Fit seat base
Note: Screws must be
inserted with locking compound.
• |
Insert seat base in guide
|
|
|