Field Remedy: 2404
Subject: |
Front seat upholstery covering - Fastening
loose |
Models: |
Engines: |
Option: |
Corsa-D |
All |
|
Complaint: |
Fastening of front seat upholstery covering
becomes loose. |
Cause: |
Insufficient Fastening. |
Production: |
|
Remedy:
In case of customer complaint the seat upholstery covering must be
fastend with retaining bands.
Working procedure:
1. Remove front seat pad
- see working procedure "Replace front seat pad", group "C",
Service Instruction Corsa-D.
(L08: Document number 01601758)
(L68: Document number 01601759)
Note:
Do not detach seat upholstery covering from seat pad.
2. Fasten seat upholstery covering (Bild I)
- Arrange seat upholstery covering correct on seat pad
- Attach retaining bands with staples (width minimum 12 mm) to the
ends of seat upholstery covering on underside of seat pad as
shown.
Important:
- Attach 3 staples on each connection point.
- The array of the staples (arrow) must be implicitly carried
out as shown.
- During creation the connection points the respective retaining
band must be completely relaxed, otherwise the staples will
become loose.
3. Install front seat pad
- see working procedure "Replace front seat pad", group "C",
Service Instruction Corsa-D.
(L08: Document number 01601758)
(L68: Document number 01601759)
Spare-Parts: Part-No.: Catalogue-No.:
Kit retaining bands 93196944 98 98 066
Labour Times: TC: Hours:
U3 240 40 Fasten seat upholstery 90 0,9
covering
The costs for this repair will be covered during the normal warranty.
The regular warranty procedure should be used for claiming
Set-up-time.
FunctionalGroup: |
C - Equipment/Windows |
Complaint Group: |
11 - Loose or Comes off |
Trouble Code: |
None |
|