Replace ribbed V-belt
Remove
2. |
Raise vehicle by its full height
|
3. |
Remove engine cover and right engine splash guard
|
4. |
Remove ribbed V-belt
Note: Mark direction of
rotation
• |
Apply tension to ribbed V-belt tensioner via bolt (1) in the
direction of the arrow
|
• |
Secure ribbed V-belt tensioner at bore (2) with KM-6130
|
|
|
|
Install
5. |
Insert ribbed V-belt
Note: Observe direction
of rotation
• |
Position ribbed V-belt
– |
I. Ribbed V-belt without air conditioning
|
– |
II. Ribbed V-belt with air conditioning
|
|
• |
Apply tension to ribbed V-belt tensioner via bolt (1) in the
direction of the arrow
|
|
|
|
6. |
Install engine compartment cover and/or right engine splash
guard
|
7. |
Lower vehicle by its full height
|
|