Replace oil pump seal ring
Remove
1. |
Remove toothed belt drivewheel
|
2. |
Remove oil pump gear (1)
• |
Unscrew nut
Note: Counterhold with
socket wrench (2)
|
|
|
|
Important: Do not damage sealing
surfaces
|
3. |
Prise out oil pump seal ring (1) with a suitable tool
|
|
|
Install
4. |
Install oil pump seal ring
• |
Insert new seal ring in oil pump cover
|
• |
Drive in as far as the stop with KM-657 (1)
|
|
5. |
Fit oil pump drive gear
• |
At oil pump
Note: Note installation
position (arrow)
|
• |
Tighten nut 60 Nm , slacken nut
(wait 60 seconds), tighten nut 60 Nm
|
|
|
|
6. |
Install toothed belt drive wheel
|
|