vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Stop/Start System|Description and Operation > < Add-on Heater, Remove and Install

Corsa D

Replace instrument housing assembly

Important:   When replacing the control unit, before removing the control unit carry out a "Reset" using TECH 2.

  Remove

1.   Disconnect battery
2.   Unclip the panel, instrument housing assembly (1)
•   Release 5 clamps (2)
Object Number: 10679680 Size: DEFAULT


3.   Remove instrument housing assembly
•   Unscrew 3x bolts (1)
•   Release wiring harness plug (2) and disconnect
Object Number: 10679681 Size: DEFAULT


  Install

4.   Install instrument housing assembly
•   Connect wiring harness plug and latch
•   Tighten 3x bolts
5.   Clip in the panel, instrument housing assembly
•   Insert 5 clamps
6.   Connect battery
7.   Program volatile memories
Note:   When replacing the control unit, after installing the control unit, execute "Program" with TECH 2.

Stop/Start System|Description and Operation > < Add-on Heater, Remove and Install