|
Replace vacuum line brake servo
 Remove
| 1. |
Separate wiring harness plug brake servo vacuum sensor (1)
|
|
|
| 2. |
Withdraw brake servo vacuum sensor with brake servo vacuum line
(1) from brake servo
|
| 3. |
Detach brake servo vacuum line (2) from vacuum pump
|
|
|
Install
| 4. |
Attach brake servo vacuum line to vacuum pump
|
| 5. |
Push brake servo vacuum sensor with brake servo vacuum line
into brake servo
Note: Ensure that all
the connections are perfectly sealed.
|
| 6. |
Connect wiring harness plug brake servo vacuum sensor
|
| 7. |
Check function of brake servo 
|
|
