Replacing the Digital Audio Broadcast (DAB)
receiver
Remove
|
2. |
Remove lower foot well panelling, passenger side (3).
|
|
3. |
Remove glove compartment
• |
Unscrew 4 screws (1) and (2)
|
• |
Disconnect the wiring harness plug, glove compartment
lighting
|
|
|
|
4. |
Remove the DAB control unit
• |
Unclip retaining lug (1)
|
• |
Release wiring harness plug (2) and disconnect
|
• |
Disconnect antenna cable (3)
|
|
|
|
Install
5. |
Installing the DAB control unit
• |
Install control unit
– |
Connect wiring harness plug and latch
|
|
|
6. |
Fit glove compartment
• |
Connecting the wiring harness plug, glove compartment
lighting
|
|
7. |
Install lower foot well panelling, passenger side.
|
9. |
Program volatile memories
|
|