|
Replace front interior lamp
 Remove
|
| 1. |
Unclip panel for microphone (2) and panel for sliding sun roof
control unit (3)
| • |
unclip using suitable tool (screwdriver)
|
|
| 2. |
Unclip glass from interior lamp (1)
|
|
|
| 3. |
Detach front interior lamp holder
| • |
Unclip holder (4) all round
|
| • |
Unclip wiring harness holder (2)
|
| • |
Disconnect wiring harness connector (3)
|
|
|
|
| 4. |
Remove ultrasound sensor
| • |
Unclip compact plug (1)
|
| • |
Unlock and disconnect wiring harness at compact plug
(arrow)
|
| • |
Unclip and remove panel with ultrasonic sensors (2)
|
|
|
| 5. |
Remove the necessary lights
|
Install
| 6. |
Install the necessary lights
|
| 7. |
Install ultrasound sensors
| • |
Clip in panel with ultrasound sensors
|
| • |
Insert wiring harness in compact plug and lock
|
|
| 8. |
Attach front interior lamp holder
| • |
Fix wiring harness plug
|
| • |
Clip in wiring harness holder
|
| • |
Clip in holder all round
|
|
| 9. |
Clip in glass for interior lamp
|
| 10. |
Clip in microphone panel and panel for sliding sun roof control
unit
|
|
