|
Replacing the signal switch actuating lever
 Remove
| 1. |
Remove steering column panelling 
|
|
| 2. |
Remove actuating lever (1)
| • |
Unclip retaining lug
Note: Using a suitable
tool (2), an angled screwdriver for internal hexagon socket 1.5 mm
WAF (width across flats), release lug.
|
| • |
Remove actuating lever
| – |
Disconnect wiring harness plug (3) in vehicles with cruise
control
|
|
|
|
Install
| 3. |
Install actuating lever
| • |
Insert stalk
| – |
Connect wiring harness plug in vehicles with cruise control
|
|
| • |
Latch lug
Note: Lug must audibly
engage.
|
|
| 4. |
Install steering column panelling
|
|
