Vauxhall Workshop Service and Repair Manuals

Lower Rear Body Panel, Replace Partially

The sales range includes left and right sections (with and without reinforcement).

Remove

Cut rear panel plate from body.

Cut applies to left and right section outer skin or assembly with reinforcement

Establish cutting line for the new part (economy part)

Align welding flange. Apply spot weld paint.

Use spot weld tape.

Observe reference dimensions of body dimension chart.

Install

Weld in rear panel piece.

Welding place is approx. 50 mm/1.97 in. outside centre to the right.

Illustration shows models 93, 94

X    New part (left or right economy part)