Heater Mat for Front Seat Cushion, Remove
Pull upholstery for seat cushion from seat frame and detach upholstery for backrest from underneath.
See corresponding operation in group "C".
Push back seat cushion upholstery to reveal heater mat.
Note:
Upholstery is glued to foam padding material. Separate carefully with a sharp knife.
Open seating joint
Push retaining pin to the top and pull out. Remove panel.
Remove retaining ring on front joint.
Press joint apart and pull out heater mats connecting cable.
Pull out wiring harness plug from front backrest upholstery and disconnect.
Pull heater mat from seat cushion
Pull connecting cable out of seat opening.