Vauxhall Workshop Service and Repair Manuals

Flywheel, Remove and Install

Remove transmission and clutch assembly.

See corresponding operations in group K.

Use KM - 652 to counterhold flywheel above starter ring gear.

Remove flywheel.

Attach flywheel and counterhold with KM-652.

Tighten securing bolts with MKM-611 and tighten further with KM-470-B.

Prescribed torque: 30 Nm/22 lbf. ft. + 45 to 60°

Important:

Use new bolts

Install clutch assembly and transmission.

See corresponding operations in group K.