vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:TROUBLE CODE TABLE Trouble Code 45 RICH EXHAUST > < F2:TROUBLE CODE TABLE Trouble Code 35 IDLE AIR CONTROL

MULTEC Central Fuel Injection (12 NZ, C 12 NZ, C 14 NZ)      F2:TROUBLE CODE TABLE

 

 

Trouble

Code

 

Information Sensor

Cause of Fault

Remedy in

F0:DATA LIST

No.

 

Trouble Code Storage when ...

 

Remarks

44

LEAN EXHAUST

 

08

09

10

11

 

·   Engine running

·   Coolant temperature higher than 20 °C/68 °F

·   Following trouble codes not stored: 33, 34

·   Only for control units up to Model Year 91: C 14 NZ

     The fault is recognized by the control unit if the oxygen sensor is voltage less than 280 mV for longer than 45 s

·   Only for control units as of Model Year 92: C 12 NZ,

     C 14 NZ

     The fault is recognized by the control unit if the oxygen sensor voltage is less than 280 mV for longer than 90 s.

 

If trouble code 13 was recognized, the control unit takes
450 mV as replacement voltage (oxygen sensor control switched off).

 

Note:

If the oxygen sensor is wrapped in aluminium foil, remove the foil. Then delete trouble code. If trouble code 44 is set again, start trouble-shooting.

 

 

 

 

 


Related Literature Units
-Quick Check F0:DATA LIST No.08 02 SENSOR
-
-
-

F2:TROUBLE CODE TABLE Trouble Code 45 RICH EXHAUST > < F2:TROUBLE CODE TABLE Trouble Code 35 IDLE AIR CONTROL