Vauxhall Workshop Service and Repair Manuals

Ognition Coil (with Trigger Box), Remove and Install

Illustration (D 4223) shows C 14 NZ engine.

Disconnect all cable connections from ignition coil.

Disconnect wiring harness plug from trigger box and remove ignition coil from wheel housing.

The trigger box, located separately on a cooling plate, can be removed from the ignition coil.

Remove trigger box from cooling plate.

Fasten trigger box to cooling plate.

Fasten cooling plate to ignition coil.

Install ignition coil and restore cable connections.

Connect wiring harness plug to trigger box.