vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:TROUBLE CODE TABLE Trouble Code 35 IDLE AIR CONTROL > < F2:TROUBLE CODE TABLE Trouble Code 19 INCORRECT RPM SIGNAL

Multec M (14 SE / C 14 SE / C 16 SE)          F2:TROUBLE CODE TABLE

 

 

Trouble

Code

 

Information Sensor

Cause of Fault

Remedy in

F0:DATA LIST

No.

 

Trouble Code Storage when ...

 

Remarks

24

NO VEHICLE SPEED

SIGNAL

 

11, 12

·   Engine running in engine speed range 1200 to 5000 rpm

·   Intake manifold absolute pressure less than 240 hPa

     (deceleration, e.g. possible in 4th gear from 120 km/h (75 mph) downwards)

·   Following trouble codes not stored: 21, 22, 33, 34.

·   Incorrect signal from speed sensor.

     Vehicle speed less than 6 km/h (4 mph)

·   Above conditions must be fulfilled for at least 8 s.

 

Note:

If the display "R-D-2-1 12 V" does not appear in test step 09 of the Quick Check for manual transmissions, trouble code 24 cannot be set (see test step 09 of Quick Check).

 

 

 

 

 

 

 

 

 

 

 


Related Literature Units
-Quick Check F0:DATA LIST No.11 VEHICLE SP. PULSE
-

F2:TROUBLE CODE TABLE Trouble Code 35 IDLE AIR CONTROL > < F2:TROUBLE CODE TABLE Trouble Code 19 INCORRECT RPM SIGNAL