Vauxhall Workshop Service and Repair Manuals

Piston Wrist Pins                                          10 S, 12 NC, E 12 GV

Length                                          mm                                          65

Diameter                                       mm                                          20

Design                                                                             shrink-fit in con-rod

                                      In piston                                       0.0015 to 0.0195

Play mm

                                      In con-rod                                              none

Installation                             In order to install the wrist pin, heat the connection rod to approx. 280 °C

                                                 using hot plate or electric kiln MW 101. This temperature must not be

                                                                exceeded. Use Thermocolor Pencil No. 2815/280.