vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Oil Circulating > < Technical Data - OHV ENGINE - Drive Belts

 

 

Fuel Pump, Replace

 

Disconnect battery.

Loosen mounting for fuel hoses.

Pull off hoses.

Remove fuel pump from cylinder block.

Remove gasket.

 

Important:

Close fuel lines with spring clamps before pulling off.

Observe general safety regulations for handling combustible fluids.

 

 

Object Number: 2380815  Size: DEFAULT

 

 

Clean sealing surfaces.

Install fuel pump - do not tilt when tightening.

Install fuel pump with new gasket.

Attach fuel hoses and fasten.

Connect battery.

 

Tightening torque: fuel pump to cylinder block - 18 Nm / 13.3 ft. lbf.

 

Oil Circulating > < Technical Data - OHV ENGINE - Drive Belts