Nova
|
Wiring Harness - Central Door Locking System, Electric Mirror Adjustment and Electric Window Winders, Replace
Illustration shows layout on vehicles up to MY '90
Remove
Disconnect ground cable from battery. Remove both front seats. Remove footwell side covering at left and right A pillars. Remove left and right sill panel covering. Remove middle console. Remove inner panelling and water vapour barrier from front and rear doors. Unscrew ground cable from under floor. Disconnect wiring harness plugs from: - Switch, mirror adjustment - Fuse box - Switch, window winder - Control unit, central locking system - Switch, central door locking system (driver's door) - Servo motor, central door locking system (passenger front and rear doors) - Outer mirror wiring harness - Motors - elect. window winders Pull wiring harness through rear compartment.
Install Install in reverse order.
|
|
