|
Models 93, 94, 98, 99
|
|
|
Connect wiring harness for trailer socket to both tail
lights and to wiring harness of vehicle.
Disconnect vehicle wiring harness from both tail lights.
Lay wiring harness with single red wire to the left side.
Models 93, 94, 98, 99
|
|
|
Use compass saw to cut hole (70 mm/2.76 in. dia.) in
rear bumper for trailer hitch ball end on models 93, 94, 98, and 99.
Mark is factory-provided on the backside.
Remount bumper.
|
|
|
