|
Install inner panelling for rear quarter panel – see
operation "Rear Quarter Panel Inner Panelling, Remove and Install,
Models 25, 26, 27" in group "C". Rear bolts for luggage compartment
hinge (1).
Install
– insert new pins. Fit compression strut (4) with spacer
bushing over fitted bushing (2) and tighten nut.
– dock compression strut on wheel housing and drill an
Ø 8.3 mm hole (3) for attaching the compression strut.
– fasten compression strut with nut and bolt.
Rear quarter panel inner panelling.
Note: Obtain
necessary parts from "Service" department.
|
