Inner Rear Section of Rear Quarter Panel, Replace
(Partial Replacement) – Models 21, 22, 23
(Additional operations to "Rear Quarter Panel, Replace" and
"Door Sill – Rear Lower, Replace")
Remove
Attaching parts. Drill off and cut rear quarter inner panel.
Observe size of new part!
|
|
Install
Fit rear inner rear quarter panel.
Prepare flanges, apply spot weld paint. Weld in new part. Apply
underseal.
Attaching parts.
Note: After painting
the inner quarter panel, insert clinch bolts at the rear to fasten
the tailgate panelling using conventional clinch bolt tongs.
|
|
|