Cage Nut – Rear Axle, Rear Frame –
Models 21, 22, 23
Cut lines, rear frame
|
1 =
|
partial replacement "long" corresponds to approximately 870
mm.
|
2 =
|
partial replacement "short" corresponds to approximately 620
mm.
|
|
|
Fastening points, rear frame
|
3 =
|
Hanging cage nuts (4 x thread M10 x 1.25)
|
4 =
|
Insert cage nut (3 x thread M14 x 1.5)
|
5 =
|
Insert cage nuts (3 x thread M14 x 1.5)
|
Note: As of Model
Year 96, the Aftersales Department supplies the rear frame with
welded-in cage nuts. Replacement of cage nuts is described in a
specific information bulletin.
|
|
|