Cage Nut – Rear Axle, Rear Frame –
Models 25, 26, 27
Cut lines, rear frame
|
1 = partial replacement "long" corresponds to approximately 870
mm.
|
2 = partial replacement "short" corresponds to approximately 640
mm.
|
|
Fastening points, rear frame
|
3 = Insert cage nuts (3 x thread M14 x 1.5)
|
4 = Hanging cage nuts (4 x thread M10 x 1.25)
|
5 = Insert cage nuts (3 x thread M14 x 1.5)
|
|
|
Note: As of Model
Year 96, the Aftersales Department supplies the rear frame with
welded-in cage nuts. Replacement of cage nuts is described in a
specific information bulletin.
From MY 2000, 5 rear frame extensions are same length. Cutting
lines "1" and "2" apply from then, corresponds to approx 450 mm
measurement line no longer applies.
|