Operational procedure
|
Paint stage
|
Products
|
Notes
|
|
IIa
|
IIb
|
|
|
Clean
|
x
|
x
|
Antistatic / silicone remover
|
Spray on using pump atomiser and dry well using highly absorbent
cloth.
|
Sand
|
x
|
x
|
Sanding/matting pad fine, blend prep.
|
Produce covered, matt surface when sanding. Sand wet. Allow to
dry.
|
Clean
|
x
|
x
|
Aqueous degreaser
|
See clean
|
|
|
|
|
|
Spray bonding agent 666
|
x
|
x
|
Bonding agent + 20% hydro base coat activator
|
Spray on bonding agent mixture:
In paint stage II a:
Spray one layer of bonding agent mixture to
cover the entire area.
In paint stage II b:
Spray bonding agent mixture only to adjoining
part outside of damaged area.
|
Spray base paint
|
x
|
–
|
Water base coat
|
Pre-spray layer fading out into the adjoining part surface and
the individual part. Setting time 3 minutes.
|
|
|
|
|
|
Feather base colour
|
x
|
–
|
Water base coat
|
Feather over the fading out zone of the first layer, continuing
onto the adjoining part surface. Setting time 3 minutes.
|
Spray clear coat
|
x
|
x
|
As required.
2-C HS clear coat
VOC clear coat
Water base clear coat
|
Pre-spray one layer. Setting time 3 to 5 minutes. Final spraying
with one more layer. Setting time 8 minutes prior to oven
drying.
|