|
Release lower belt fastening, lever off upper cover. For
optional equipment "anti-theft warning system": Lever off
anti-theft warning system sensor and remove wiring harness
plug.
Lower B-pillar inner panelling, upper B-pillar inner panelling,
thread seat belt out of upper B-pillar inner panelling.
Install
Thread seat belt through upper B-pillar inner panelling, upper
B-pillar inner panelling.
Note: Ensure belt
height adjustment is correctly installed.
Lower B-pillar inner panelling, upper cover, anti-theft warning
system wiring harness plug, anti-theft warning system sensor, lower
belt fastening – tightening torque 35 Nm / 26 lbf. ft.
|
