Subject:
Load
Compartment Floor Handle
Vehicles:
Omega-B Estate, Models 21, 22 and 23
General:
For
the replacement of the pulse-welded handle used in production the Parts &
Accessories Dept. offers as a Service solution a handle set and spring nuts.
Procedure:
Open
tailgate and fold up load compartment floor.
Lay
cloth over spare wheel and floor (protection against shavings).
|
|
Remove, Detach:
Pre-punch
the sprayed pins of the handle with an awl and drill off ( 5 mm/0.197 in.
drill).
Remove
plastic ring and handle.
|
|
Install, Attach:
Position handle from above and plastic ring from
below (ribbing visible -1-).
Important:
Incorrect installation of the plastic ring leads to
malfunctioning.
Attach
5 spring nuts and press on with commercially available T-handle (9 mm/0.354
in.).
|
|
Parts:
Designation Part
No. Catalogue No.
Handle,
load compartment floor (set), grey 90 511 436 22 23 302
Handle,
load compartment floor (set), black 90 511 435 22 23 301
Spring nut 90
062 315 01 66 768
Time
Allowance:
C 4327 00 Handle - Load
Compartment Floor - Replace .2 hrs.
TC: 01, 27,
71
W 1000 00 Vehicle from Parking Place to
Workplace .2 hrs.
TC: 99