Omega B
|
Programming steps:
1. Switch on ignition. 2. Preselection switch rotary knob in "closed" position and press for approx. 3 sec. until motor stops (calibration run). The sliding roof is now in the closed position. 3. Set preselection switch rotary knob to "tilted" position: sliding roof tilts. 4. Set preselection switch rotary knob to "closed" symbol and keep pressed until sliding roof is closed (1st instruction run). 5. Set preselection switch rotary knob to "open" symbol. The sliding roof opens. 6. Set preselection switch rotary knob to "closed" symbol again and keep pressed until sliding roof is closed again (2nd instruction run).
|
