vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Labour Time Allowances > < Replace service connection valve - air conditioning charged

Torque guide values - group D

Petrol engine, X 20 DTH engine

 

Nm

Bracket, refrigerant lines to engine block (X 25 XE, X 30 XE)

8

Refrigerant lines to compressor M10

40

Fluid drain bolt to compressor

15 – 25

Hex nut to compressor shaft

11 – 22

Safety valve to compressor

13.5 – 19

Compressor to bracket (X 20 DTH)

20

Compressor (X 25 XE, X 30 XE) from front to bracket – 3 bolts M10

35

Compressor (X 25 XE, X 30 XE) from rear to bracket – 2 bolts M8

20

Compressor (X 20 XEV, X 20 XE) from front to bracket – 3 bolts M10

35

Compressor (X 20 XEV, X 20 XE) from rear to bracket – 3 bolts M8

20


6 cylinder diesel engine

 

Nm

Refrigerant lines to compressor

20

Fluid drain bolt to compressor

27

Tension roller for v-belt to bracket

20 – 24

Compressor clutch to compressor shaft - not Y 25 DT

10.8 – 16

Compressor clutch to compressor shaft - Y 25 DT

9.5 - 12

Compressor to bracket

20 – 24


All Vehicles

 

 

Nm

Triple switch

7

Retaining clamp for receiver-dryer

4

Refrigerant lines to:

 

 

Receiver-dryer

20

 

bulkhead flange

20

 

Pulsation damper

27

 

Expansion valve

20

 

Condenser

20

Bolted connection – low pressure service connection

44

Coolant temperature switch

21

Motronic switch

7

Expansion valve to evaporator

7

Fan motor housing to pollen filter housing

4 – 4.5

Fan motor housing to bulkhead

4 – 4.5

Pipe retainer plate to heater core

4.5 – 6.5

Bracket for centre console and rear air nozzle air duct to body

3.5 – 4.5

Air distributor housing to bulkhead/body

4 – 4.5

Strut to steering column

22

Strut to vehicle underbody

22



Related Literature Units
-
-

Labour Time Allowances > < Replace service connection valve - air conditioning charged