|
 Remove
Support rear differential using hydraulic jack with KM-485 or
KM-6195 and KM-904. Unbolt damping blocks (3) from rear axle body
and vehicle underbody.
Attach damping blocks to vehicle underbody with fastening bolts
(2) – tightening torque 65 Nm / 48 lbf. ft.
Use new fastening blots (1) to attach damping blocks onto rear
axle body – tightening torque 90 Nm / 66.5 lbf. ft. + 30°
+ 15°.
|
