Control Unit-ABS/TC, Remove and Install or Replace
(ABS 2 SH/TC)
Remove
Release ground cable from battery. Remove fastening bolt (1).
Remove control unit cover.
|
|
Disconnect wiring harness plugs (1, 2 and 3).
Caution
Relay for pump motor and solenoid valves cannot be removed.
|
|
Remove
Remove fastening bolts (1). Remove ABS/TC control unit.
|
|
Torque
ABS/TC control unit to bracket – 1.5 Nm / 1.1 lbf. ft.
Install
Connect wiring harness plugs (1, 2 and 3). Install battery
ground lead.
|
|
|