|
Cylinder head machining table of contents
Cylinder Head and Attaching Parts, Check and
Measure
Survey (OHC Engines) 
Survey (DOHC Engines, 16V Engines)
Cylinder Head Height, Check
Cylinder Head, Check for Plane Surface
Valve, Measure
Inner Diameter of Valve Guide, Check
Valve Stem Play, Determine
Installation Height of Valves, Check
Installation Height of Valve Guide, Check
Swirl Chamber Projection, Check
Cylinder Head, Check for Coolant Leaks (25 DT, X
25 DT, Y 25 DT)
Valve Tilt Play, Check (25 DT, X 25 DT, Y 25 DT)
Cylinder Head, Overhaul
Survey of Special Service Tools to be used
Cylinder Head, Attach to Assembly Tool Set KM-6215
Cylinder Head, Disassemble
Heat Sleeve, Replace (Y17 DT, Y 17 DTL, Y 30 DT, Z
30 DT)
Valves, Remove
Valve Seat Rings, Replace (X 15 DT, X 17 DT)
Valve Seat, Cut (in Cylinder Head)
Valve Guide, Replace (Y 17 DT, Y 17 DTL)
Valve Guide, Replace (X 15 DT, X 17 DT)
Valve Guide, Replace (Y 30 DT, Z 30 DT)
Valve Guide, Ream
Valve, Grind
Valve, Grind In
Valve Stem Seals, Replace
Cylinder Head, Assemble
Special Service Tools
|
