Press key F5 in the system main
menu, select the desired test using the arrow keys and confirm with YES.
Follow the instructions in the TECH 1 display.
Note:
The control unit switches the
preheater time relay alternately to "preheating" and "no
preheating".
The check is completed after a
maximum of 30 s.
Note:
If this test is completed before
its allocated time has elapsed (30 s), the diagnosis lamp flashes until
another actuator test has been selected or 30 s have elapsed.
|
The preheater time relay is switched
alternately
INACTIVE
12V
ACTIVE 0V
Noise check:
clicking noise from preheater
time relay
|