Press F5 in the system main menu, select desired test
with arrow keys and confirm with YES. Follow instructions in the TECH 1
display.
Note:
The control unit switched the preheating period relay
alternately between "preheating" and "no preheating".
The check is completed after a maximum of 30 s.
Note:
If this test is completed before its allocated time has
elapsed (30 s), the diagnosis lamp flashes until another actuator test
has been selected or 30 s have elapsed.
|
The preheating period relay is switched alternately:
INACTIVE 12 V
ACTIVE 0 V
Noise check:
Clicking noise from preheating period relay.
|