· Engine
running in full load range
· No
TC (Traction Control) regulation signal from control unit
· Trouble
codes 59, 63, 133, 134 not recognized
· Engine
load signal for less than 12 ms
· Less
than 6 intake manifold switchovers since last idle operation (engine is
in partial or full load range)
· Engine
speed range
X 25 XE: 8040
to 8080 rpm
X 30 XE: 4600
to 5600 rpm
· Intake
manifold valve 1 open
· Position
of intake manifold valve 2 unchanged for 0.5 s
· Control
unit switches intake manifold valve 1 from open to closed
The fault is recognized if the
resulting engine load signal jump is not present for longer than 0.14 ms
|